Description
PRODUCT DESCRIPTION
MAX REPAIR POWER is a powerful and flexible repair adhesive for long lasting results of all sorts of repairs on porous and non-porous materials. Suitable for indoor and outdoor applications.
FIELD OF APPLICATION
Suitable for repairing porous and non-porous materials such as wood, textile, leather, cork, metal, glass, plastic, rubber, ceramic tiles, stone, cement and many other materials. Suitable for indoors and outdoors.
Not suitable for Polypropylene (PP), Polyethylene (PE) and P.T.F.E.
PROPERTIES
· Extremely strong· Extremely flexible· Water resistant· Gap filling· Dishwasher-safe· Resistant to shock and vibrations· Temperature resistant · UV resistant· Acid and solvent-free· Transparent
PREPARATION
Surface Requirements: The surface must be dry, clean, free of dust and grease.
APPLICATION
Directions for use:
Can be applied directly from the tube using the fine dispensing nozzle.
Apply the adhesive on one side. Press the parts against each other. Adjustments can be made within 5 minutes. The maximum final bonding strength is reached after approximately 24 hours. This might vary, based on6circumstances, like6materials, temperature and humidity. After use, let some adhesive come out of the tube before you screw the cap on it.
Stains/residue: Use cleaner’s solvent for removing wet adhesive residue. Dry adhesive residue can only be removed mechanically.
Advice: Loosen the stuck cap under the hot tap and remove any hardened adhesive in the tube cap with a sharp knife.
TECHNICAL SPECIFICATIONS
|
Chemical base: |
SMP Polymer |
|
Chemicals resistance: |
Good |
|
Color: |
Transparent |
|
Cure rate: |
1 mm/24h |
|
Density approx.: |
1.1 g/cm³ |
|
Elasticity: |
Limited |
|
Filling capacity: |
Very good |
|
Final bond strength: |
800 N/cm² |
|
Final bond strength after: |
24 hours. This might vary, based on6circumstances, like6materials, temperature and humidity. |
|
Hardness (Shore A): |
80 |
|
Initial Bonding after: |
10 minutes. This might vary, based on6circumstances, like6materials, temperature and humidity. |
|
Minimum temperature resistance: |
-40 °C |
|
Maximum temperature resistance: |
120 °C |
|
Moisture resistance: |
Very good |
|
Paintable: |
Good |
|
Shear strength: |
800 N/cm² |
|
Skin over time: |
5 minutes |
|
Solid matter approx.: |
100 % |
|
Solvent free: |
Yes |
|
UV resistance: |
Good |
|
Viscosity: |
Thixotropic |
|
Water resistance: |
Very good |
PACK SIZES
8 g, 20 g
STORAGE CONDITIONS
Store in a dry and cool place.